BATTERY, Flood Cell - 6Volt 4Ah:
|Stock:||In stock Stock is running low, get in quick. Contact us to find out stock availability.|
The prices shown in the search results are recommended retail for Qld, NSW and ACT only. Actual pricing may vary depending on freight, dealers and location.
Information & Specifications
Flood Cell Standard Duty Lead Acid Battery.
Simply Activate the battery with the supplied electrolyte pack.
Dynavolt [6N4-2A /-4/-8] or Haijiu [6N4B-2A- /-4/-8]
6 Volt 4 Ah Capacity
Dimensions (mm) - L 70 x W 70 x H 95
Terminal configuration - Negative LHS Eyelet end & Positive RHS with inline fuse holder and RHS Breather outlet
Terminal type - A Multi Fit Wire kit is supplied with various fitting connectors.
This series of batteries should only be used in the upright vertical position and must be securely retained to prevent movement.
Instructions: Add the battery electrolyte to each cell as per the instructions and allow the battery to stand for 1 hour to allow full absorption of the electrolyte. Next, fully charge the battery before fitting into the motorcycle for best battery service life.
Note - Check terminal voltage prior to fitting. If below 6.0V, then charge the battery for best service life.