RoadStar Battery Logo


Home | Fitment Guide

RoadStar batteries

About RoadStar batteries

rsbattery-top
ROADSTAR Batteries – for Motorcycles, Scooters, ATVs, PWCs & Ride-ons.
  • • Roadstar batteries have been developed and produced to the highest international standards.
  • • All materials used are certified and manufactured to ISO 9001 standard.
  • • The Roadstar range of available batteries is one of the World’s most complete product lines.
 

Battery types available :

Standard and Heavy Duty lead batteries – dry charged.

  • • Supplied with an acid pack to fill the battery.
  • • This type of battery should be maintained and serviced with distilled water when required.
  • • Refer to "Commissioning a new ROADSTAR Battery" for the procedure when servicing a new battery.

Heavy Duty CX Lead-Calcium batteries – dry charged.

  • • This type of battery is constructed with Lead-Calcium technology which increases the performance and reduces the maintenance – ideally suited for Harley Davidson. Supplied with an acid pack to fill the battery.
  • • This type of battery should be maintained and serviced with distilled water when required.
  • • Refer to "Commissioning a new ROADSTAR Battery" for the procedure when servicing a new battery.
 

MTF battery (Maintenance Free Type), A.G.M. (Absorbed Glass Matting) – dry charged.

  • • This type of battery comes dry charged with model specific acid pack/s. (If two acid packs are supplied with the battery, both are required to complete the initial 'wetup' procedure).
  • • Once filled, the battery is sealed and no further maintenance is needed, providing the charging system is operating correctly. If excessive over charging occurs, top up with distilled water.
  • • Refer to "Commissioning a new ROADSTAR Battery" for the procedure when servicing a new battery.

Sealed Activated battery, A.G.M. (Absorbed Glass Matting) & POWER GEL – pre-charged at factory.

  • • This battery is sealed from the factory and is ready to be installed with no further maintenance required. The battery voltage should be checked prior to installation and charged if required.
  • • The big advantage of this type is that it is designed to work in the "up right" or "lay down" position.
  • • Refer to "Commissioning a new ROADSTAR Battery" for the procedure when servicing a new battery.