MOTUL MOTOCOOL FACTORY LINE is a racing cooling liquid, ready to use, based on monoethyleneglycol, using organic anti-corrosion additives to provide an outstanding protection to aluminium/magnesium alloys used by bike manufacturers on new engines design.

PERFORMANCES

Cooling system optimal protection from freezing and metallic parts from corrosion.
Specific anti-corrosion agents provides the best protection efficiency on aluminium/magnesium alloys according to a dynamic corrosion test performed on a bike radiator, MOTOCOOL FACTORY LINE divides by 3 the corrosion rate compared to a common organic coolant.
Provides an excellent thermal exchange and then engine cooling efficiency and prevents from boiling.
This organic technology provides anti-corrosion properties that remain while high temperature and ageing. Low corrosion inhibitors consumption allows extended drain intervals. Water pump protection, avoid cavitation.
Seals, durits and plastic parts friendly.
Contains a bitterness agent to prevent from drinking : coolants and antifreezes have a sweet taste but are harmful.

RECOMMENDATIONS

Ready to use, do not add any water
Drain intervals : Refer to the manufacturers' recommendation.
Do not mix with non organic products.
This product should not be used to protect drinking water systems against freezing.

Ready to use cooling liquid
Anti-corrosion and anti freeze,
Protection -35°C/-31°F
AOT Technology
Nitrite free / Amine free / Phosphate free / Borate free / Silicate free